שעון ייצור

Talking about the watches manufacturing experiences and watchmaking related

rolex watches

רק אבנים! מייצר את החוגים המגמתיים של הרולקס כחול וירוק

All things that are beautiful with color, such as flowers and leaves, or the blue of the sky and the glory of sunset, are fleeting and ever-changing. Only the luster and color of precious stones have remained unchanged from thousands of years ago until now. Thousands of years later, they will be the same

-[הסיפור המוזר של אבן יקרה]

ג'ורג' פ. קונץ (גמולוג ומינרלוג, שנת 1856~1932)

 

השימוש באבני חן אינו מוגבל לתכשיטים; הם נפוצים גם בייצור שענים. רוב אבני החן ידועות בעמידותן, והצבעים העשירים והברק שלהן משפרים את האסתטיקה של השעונים.

הם משובצים במארזי שעונים ומשמשים כקישוטים על חוגות שעונים. בדומה ל-Pantone המכריזה על צבע השנה, בשנים האחרונות חלה מגמה בענף השעונים בה צבעים שונים שולטים בחוגות השעונים בזמנים שונים.

מותגים משיגים ביטוי צבעוני באמצעות טכניקות כמו צביעה ואמייל, ושימוש באבני חן מחומרים שונים ליצירת חוגים היא גם שיטה פופולרית.

האם אתה מכיר את אחת מאבני החן?

עבור שעוני יד, מה מגדיר יופי?

אנו נוהגים לשקול גורמים כמו עיצוב מארז, פריסת חוגה, גב מארז שקוף ופונקציונליות מורכבות - הכל בגבולות של חלל קטן, שבו היופי טמון בפרטים.

The dial, often compared to afacial expressionfor watches, is undoubtedly influenced by its color. As mentioned, when gemstones are crafted into watch dials, the emphasis tends to lean towards considerations ofcolor coordination.Therefore, compared to the intrinsic value of the gemstone itself, its color plays a crucial role in expressing the overall aesthetic appeal of the watch and significantly impacts its value.

In the pursuit of enhancing the visual allure of thisface,brands invest effort into selecting gemstones of appropriate colors.

פוסט זה משתמש בסוגים שונים של אבני חן יקרות, ולהלן היכרות עם כמה אבני חן בשימוש נפוץ ביצירת חוגות שעונים.

 

01 יהלום

 

יהלום הוא אבן החן היחידה המורכבת מיסוד בודד - אטומי פחמן, עם תכולת פחמן גבוהה של 99.95%. 0.05% הנותרים מורכבים מיסודות קורט שאינם שייכים למבנה הכימי הבסיסי שלו. רוב היהלומים נוצרו בעידן הקדום, לפני יותר ממיליארד שנים, והם התגבשו רק בתנאי טמפרטורה ולחץ גבוהים כ-100 מייל מתחת לפני כדור הארץ.

יהלום גולמי
יהלום חתוך

 

כיצד אנו מעריכים את איכותו של יהלום חסר צבע? זה מבוסס על 4Cs: קראט (משקל), צבע, בהירות וגזרה. לפי קריטריונים אלה, יהלום טוב הוא כזה שהוא גדול יותר, חסר צבע יותר, צלול יותר וחיתוך היטב. בנוסף, ישנם כמה יהלומים צבעוניים יקרים בעלי ערך גבוה במיוחד.

ליהלומים יש היסטוריה ארוכה, עם תיעוד של מסחר ביהלומים כבר בשנת 800 לפני הספירה בהודו. כיום, יהלומים נפוצים ברחבי העולם. דרום אפריקה ואוסטרליה הם אזורים עיקריים לייצור יהלומים.

ליהלומים יש זוהר מסנוור שאין שני לו מאבני חן אחרות. הם לא רק מועדפים בתכשיטים, אלא גם מופיעים לעתים קרובות בשעונים. כאבן החן הקשה ביותר בעולם, יהלומים מוצגים לעתים קרובות בשעונים כחלק מהלוח, ומציגים את הניצוץ שלהם דרך הגדרות מורכבות.

 

02 לפיס לזולי

קשיות מוהס: 5-5.5

לאפיס לזולי גולמי

לפיס לזולי הוא סלע מטמורפי נדיר המורכב בעיקר ממינרל עם נתרן, אלומיניום, סיליקון, גופרית, כלוריד והידרוקסיד, יחד עם כמויות שונות של פיריט וקלציט לבן. זוהי אבן חן חצי שקופה עד אטומה עם ברק שעווה עד זכוכית.

צבעו של לאפיס לזולי משתנה מכחול מעט ירקרק לכחול סגול, ולפיס לזולי איכותי מאופיין בכחול אחיד רווי מאוד עם כתמי זהב מינימליים.

אבנים מלוטשות

 

As early as 3100 BCE, there are records of lapis lazuli being mined, making it possibly the earliest used blue gemstone by humans. In ancient civilizations, including Mesopotamia, Egypt, China, Greece, and Rome, lapis lazuli was considered a precious gem. Before the early 19th century, it was ground into powder and used as a deep blue pigment. During the Renaissance, artists used it to create a high-quality blue pigment known asUltramarine.

ללפיס לזולי יש היסטוריה ארוכה של כרייה באפגניסטן והיא נותרה מקור עיקרי עד היום. אזורי ייצור מרכזיים אחרים כוללים את צ'ילה ורוסיה. Lapis Lazuli היה באופן עקבי חומר מועדף לחוגות שעונים בשעוני יוקרה

 

03 עין הנמר

קשיות מוהס: 6.5-7

עין הנמר הוא זן יקר למחצה של קוורץ הידוע בצ'טואינטיות שלו - תופעה שבה רצועת אור בהירה, הדומה לעין הארוכה והצרה של חתול, מופיעה על פני השטח המעוגל של אבן החן. הוא נקרא על שם הדמיון שלו לעיניים החדות של נמר.

תמונות מהאינטרנט

 

עין נמר מלוטשת-תמונות מהאינטרנט

עין הנמר נוצרת בשלבים הראשונים של השינוי של סיבי קרוצידוליט, תחילה הופכת לתחמוצת ברזל ומאוחר יותר מוחלפת בסיליקה. אבן החן היא בדרך כלל אטומה וצבעה נע בין צהוב עשיר לחום. עין טייגר איכותית צריכה להציג משטחים ללא רבב, עם אפקט עין חתול מוגדר היטב ובוהק ממוקם במרכז.

 

לעין הנמר יש אזכורים היסטוריים עוד מימי הרומאים והמצרים הקדומים, שם היה קשור לאלי שמש ולניצחון. המקורות העיקריים של עין הנמר כוללים דרום אפריקה, ברזיל וסין.

לאחר חיתוך קבושון, עין הנמר מציגה ברק מעולה, והאטרקטיביות שלה מועצמת עוד יותר על ידי השתקפויות שונות במבט מזוויות שונות.

 

04 טורקיז

Mohs קשיות: 5-6

טורקיז is a gemstone formed in crystalline structures near shallow water in arid and barren regions. It is a semi-translucent to opaque gem, commonly appearing in an opaque form with stripes, spots, or iron-like vein patterns. The finest quality turquoise exhibits a unique and intense blue hue, often described asrobin’s egg blue,” “sky blue,orPersian blue.

טורקיז גולמי
טורקיז מלוטש

לטורקיז יש היסטוריה ארוכה והוא מחזיק בהבחנה של היותה אבן החן הראשונה שנכרה ושוכפלה. כבר בשנת 4000 לפני הספירה התגלו חרוזים עשויים טורקיז באתרי קבורה בקברים מצריים עתיקים.

איראן וארצות הברית הן כיום מקורות משמעותיים לטורקיז איכותי, כאשר סין היא היצרנית העולמית הגדולה ביותר. בנוסף, מקסיקו, אוסטרליה, צ'ילה, רוסיה, טורקיה ואזורים אחרים תורמים גם הם לייצור הטורקיז.

 

 

05 Chrysocolla (נקרא גם: טורקיז)

קשיות מוהס: 3.5-4.5

 

לעיל טורקיז הוא לא אותה האבן עם כריסוקולה, אבל השם עשוי להיות זהה, קריסוקולה הוא מינרל נושא נחושת הידוע בצבעו הטורקיז-ירוק, ודגימות איכותיות כוללות לעתים קרובות תצורות גושיות עם פסים ירקרקים. הוא מבולבל לעתים קרובות עם טורקיז בגלל מראה וצבע דומים. בעוד שלטורקיז יש בסיס כחול, טורקיז הוא ירוק ויכול לנוע בין שקוף לשקוף למחצה.

קריסוקולה גולמית
קריסוקולה מלוטשת

קריסוקולה/טורקיז יכול להיחשב לאחד המינרלים החשובים ביותר בהיסטוריה האנושית. מאמינים שכבר בשנת 4000 לפני הספירה גילו אנשים שחימום טורקיז יכול לייצר נחושת טבעית.

ייתכן שזו הייתה המקרה הראשון של התכת בני אדם מתכת מעפרות, עורר מחקר לתוך עפרות מתכתיות וקידום התפתחות המתכות. במצרים העתיקה בסביבות 3000 לפני הספירה, הטורקיז הוכר והשתמש בו כקמע, תכשיט וצללית.

 

06 ירקן

קשיות מוהס: 7

כַּדכּוֹד נוצר כאשר תמיסות עתירות סיליקה בטמפרטורה נמוכה חודרות לסלעים קיימים, במיוחד סלעים געשיים, בחללים ובשברים. זהו אחד מחומרי אבני החן המוקדמים ביותר בעולם. כלקדון טהור הוא לבן, אך הוא מקבל צבעים עשירים כאשר הוא מכיל יסודות קורט שונים או תכלילים מינרלים.

 

תמונה של אבן ג'דייט גולמית מ-geologyscience.com

 

לזנים רבים של כלקדוני יש שמות ספציפיים, כגון אגת, כריסופראז, אבן דם, כלקדונית ירוקה, כלקדונית אדומה, כלקדונית כחולה וקרנליאן, כאשר כלקדון ירוק הוא בעל ערך במיוחד.

כדי להבדיל עוד יותר, אגת הוא הזן המייצג ביותר של כלקדוניה, ואם יש לו מבנה פס ברור, הוא נקרא אגת. אם הוא חסר מבנה פסים, הוא נחשב לכלקדוני. אגת מתאפיינת ברצועות צבע קונצנטריות ברוב הדגימות, מציגה צבעים מגוונים בשל זיהומים שונים, בעוד שהכלקדוני חסר טקסטורות פסים ומציגה צבע אחיד.

חפצי כלקדוניה מתוארכים לתקופת האבן, עם עיטורים שנמצאו מלפני 20,000 עד 160,000 שנים. בשנת 3000 לפני הספירה, המצרים הקדמונים כבר השתמשו באגת, כלקדון אדום וכלקדוני ירוק כפריטים דקורטיביים.

כלקדוני נמצא ברחבי העולם, עם מרבצים משמעותיים בברזיל, אורוגוואי והודו, המניבים סוגים שונים של כלקדון. אזורים אחרים מייצרים גם זנים שונים של כלקדוני, כמו סין, שהיא יצרנית עיקרית של אבני דם. כלקדוניה וכריסופראז נמצאים בשימוש נפוץ בחוגות שעונים.

 

07 אוקלאס

קשיות מוהס: 5.5-6.5

Euclase forms as silica seeps into rocks beneath the ground through rainwater. As the water evaporates, silica deposits in the form of small spheres and binds with more silicon and water, creatingeuclase.

אבן גולמית של אוקלאס
אוקלאס מלוטש

What makes euclase particularly enchanting is its iridescence. When the gem is moved, various colors of shimmering reflections can be observed. This iridescence is only formed when the silica spheres are of the appropriate size and arranged in a regular pattern. The more orderly the arrangement, the larger the iridescent area, and the more pronounced the color changes. This iridescence is considered the soul and value of euclase.Precious euclaseis defined by having the iridescence, with red iridescence being the most valuable.

על פי רישומים, אזור הכרייה העתיק ביותר של האאוקלאס נמצא בהונגריה, עם כרייה שראשיתה במאה ה-14, והוא ממשיך להיות מקור לאוקלאס כיום. אוסטרליה היא היצרנית הגדולה ביותר של euclase, ומקסיקו ודרום אפריקה הן גם אזורי ייצור עיקריים.

 

08 אם הפנינה (שם אחר: Nacre)

קשיות מוהס: 2.5-4

אֵם הַפְּנִינָה מתייחס לבטנה הפנימית של קונכיות מסוימות של רכיכות שיכולות לייצר פנינים באופן טבעי. רכיכות אלו שוכנות בדרך כלל במים רדודים ונמצאות בשוניות אלמוגים וקרקעית ים באוקיינוס ​​השקט, האטלנטי וההודי. במהלך התקופה הממושכת שבה נוצרות פנינים, הבטנה הפנימית של אם הפנינה מצופה בצלם, משיבה לה צבע והופכת אותה לחומר יפה ומבוקש.

אם הפנינים- מלוטשת
שעון אם הפנינים

בהשוואה לפנינים, אם הפנינה עמידה וגמישה יותר. מאז המאה ה-13, הוא מוקיר על ידי האצולה האירופית כחומר לאמנויות דקורטיביות. אם הפנינה שימשה לקישוט רהיטים, יצירת קופסאות תכשיטים, ואף שימשה ליצירת ידיות סכין, והפכה לחלק חיוני מהחיים בתקופה ההיא. אם הפנינה היא חומר נפוץ בחוגות שעונים.

אם הפנינה מגיעה בשני סוגים: תעשייתי ואבני חן, כשהאחרון נדיר יותר. החומר המשמש בחוגות שעונים הוא באיכות אבני חן. כל אבן חן טבעית עוברת תהליכים מדוקדקים כמו מיון, פיצול, חיתוך, שחיקה, ליטוש, גימור, קידוח, גילוף ושקיעה לפני שהיא מגיעה לצורתה הסופית כחוגה שעון שובה לב.

09 מטאוריט

קשיות Mohs: סביב 4.5 עד 5.5

א מטאוריט הוא שבר של גוף שמימי, כגון כוכב שביט, אסטרואיד או מטאורואיד, ששורד את מעברו באטמוספירה של כדור הארץ ונוחת על פני כדור הארץ. שברים אלה יכולים לנוע בגודל מחלקיקים זעירים ועד מסות גדולות במשקל של כמה טונות. מטאוריטים מספקים מידע מדעי רב ערך על מערכת השמש המוקדמת ומעבר לה.

נחיתת מטאוריטים-תמונות מהאינטרנט

 

ישנם שלושה סוגים עיקריים של מטאוריטים המבוססים על הרכבם:

  1. מטאוריטים אבנים (כונדריטים): אלו הם הסוג הנפוץ ביותר ומורכבים ברובם ממינרלי סיליקט. כונדריטים מכילים לרוב מבנים קטנים וכדוריים הנקראים כונדרולים, אשר נחשבים בין החומרים המוצקים המוקדמים ביותר שנוצרו במערכת השמש.
  2. מטאוריטי ברזל: המטאוריטים הללו מורכבים בעיקר מסגסוגת ברזל-ניקל מתכתית, הם צפופים ולעתים קרובות יש להם משטח ייחודי ומלוטש הנקרא תבנית Widmanstätten. דפוס זה הוא תוצאה של התקררות איטית של מתכת בחלל במשך מיליוני שנים.

    תמונת חוגת מטאוריט מהאינטרנט
  3. מטאוריטים אבן-ברזל: מטאוריטים אלה מכילים תערובת של מינרלים סיליקטים וסגסוגת ברזל ניקל מתכתית. הם נדירים יחסית ומתחלקים לשתי קבוצות עיקריות: פלזיטים, בעלי גבישי אוליבין המשובצים במטריצת מתכת, ומזוזידריטים, בעלי תערובת מורכבת של מינרלים מתכת וסיליקט.
חוגת מטאוריט שעון-רולקס

ניתן לסווג מטאוריטים על סמך מאפייני הנפילה, הרכבם ומבנהם. הם מספקים תובנות לגבי תנאי מערכת השמש המוקדמת והתהליכים שהובילו להיווצרות כוכבי לכת וגרמי שמים אחרים. מדענים חוקרים מטאוריטים כדי ללמוד עוד על המקורות וההתפתחות של מערכת השמש שלנו.

מחשבה אחרונה:

אם אתם מכירים תכשיטים, תוכלו לראות שכל אבני החן הללו משמשות גם בתכשיטים, כמו עגילים ושרשראות, צמידים וטבעות, אבני חן שונות נבחרות בשל הצבעים, המאפיינים והאסתטיקה הייחודיים שלהן, מה שמאפשר למעצבי תכשיטים ליצור יצירות מגוונות ומעולות.

 

כמתנה מהטבע, כל אבן חן טבעית היא ייחודית, המציגה את יופיו של הטבע בצורות שונות. האם קניתם שעונים עם חוגות שעונים מאבני חן טבעיות?

 

מָקוֹר:

לפיס לזולי: https://en.wikipedia.org/wiki/Lapis_lazuli

עין הנמר: https://en.wikipedia.org/wiki/Tiger%27s_eye

טורקיז: https://en.wikipedia.org/wiki/Turquoise

קריסוקולה: https://en.wikipedia.org/wiki/Chrysocolla

כַּדכּוֹד: https://en.wikipedia.org/wiki/Chalcedony

מטאוריט: https://en.wikipedia.org/wiki/Meteorite

 

 

 

Watch Case Manufacturing Process: From Raw Material to Finished Product 11

Watch Case Manufacturing Process: From Raw Material to Finished Product

China is the most crucial base in the world, and there are countless large and small watch manufacturers in the Pearl River Delta, and these upstream, midstream, and downstream watch manufacturers form a huge and delicate watch industry chain each other.

If the movement is the core of a watch, the case is the main body of a watch. The case’s structure appearance and technology level is the direct reflection of a watch’s quality.

According to the material, there are mainly zinc alloy cases, copper cases, steel cases and titanium cases, and the general processing process of various metal cases is not too different.

The raw material for the watch cases production is the case casting/embryo, and the process is mainly: turning, milling, drilling, grinding, etc

The main processing flow of watch metal cases is as follows.

Case casting processingTurning, drilling, and millingSurface processing (polishing/brushing/sandblasting, etc.)Surface treatment (plating, etching, etc.)-Assemble case parts

Of course, this is only a general sharing of the simple manufacturing process, there are many details that have not been said, to do a good watch case not only needs meticulous processing from each department, the need for each process, the skilled workers, especially polishing process, the surface effect of good or bad all depending on the worker’s hands.

The finished watch case requires the following assembly parts: barrel, glass, bottom cover, bezel, decorative small miscellaneous parts and screws, inner cover, and o-ring, i ring.

In this article, we will explore the watch case manufacturing process, including the watch case size guide, watch case diameter, and more.

Watch Case Manufacturing Process

Let’s take a closer look at the watch case manufacturing process. The manufacturing process can vary depending on the type of watch case and the materials used, but there are some common steps that are involved in most watch case manufacturing processes.

You can see a shiny and beautiful watch case. Still, the environment of the watch case factory is not as good as we think.

The cutting processing requires the use of oil, and the work hands with oil and black, all are oil, surface polishing will also produce dust, if you go into the polishing workshop, out of a sure all of the ash. While the random chat is over.

So, Let’s check the process:

Step 1: Design the watch case structure and finished watches

Watch drawing workers is generally divided into flat draftsman (2D mostly) and structural effects draftsman(3D).

The draftsman first draw the finished watches, I generally draw 2D, 3D, and rendering drawings, to confirm that the details of the appearance of no problem. Provide 3D drawings and assembly drawings to the case factory designer, the watch case factory designer will draw the structural data drawings and our engineer will confirm, if no problem, We start to making.

(Generally, we will do the prototype first, and ensure that the prototype is OK before producing the mass order)

3D drawing

Assembly drawing

structure data drawing

Step 2: Roughly Process the case

According to the drawing, the embryo factory does the case blank (press the steel plate out of the general shape of the watch, see the below pictures for example)

Then use the machine to open the rough, cut off the extra area, but leave some margin (generally leaving 0.5mm margin)

Then the NC machine (automatic lathe) does the precision process, according to the drawing to machine the accurate size, generally, the internal structure is directly accurate in place (generally allow 3-5c tolerance range, 1c = 0.01mm a hair about 8c).

NC machine

After that, then by the drilling machine drills the hole and case lug holes and then returns to the machine grinding on the bottom area (left in the last processing outside to avoid the collapse) then do the next step- milling.

If the case style is different, the processing is also slightly different, the above is a general step, need to use the small lathe and CNC equipment.

Step 3. Grinding room Polishing

The grinding room is the most important one in the whole case processing process, and the above steps just make according to the standard process is ok, To ensure that the internal structure is correct, the appearance of polishing is all on the grinder’s craft.

Step 4. Case inspection room

After the cases are finished grilling, clean the cases, they are sent to the inspection room for inspection according to the grilling grade requirements, and the defective parts are marked with red pen for back grinding to make sure they meet the quality requirements.

Step 5. Quality Check

The quality department is mainly responsible for checking the case parts

The case accessories are generally: glasses, ceramic ring, I ring, O-ring (I ring or O ring is the waterproof ring of glass and bottom cover ), fill oil or fill luminous oil, hardware accessories (spring thread, octagon thread, watch screws), bar tube, and bottom cover.

Step 6. Warehouse

All case accessories check the quality of no problem are into the warehouse, respectively, registered into the warehouse. The warehouse confirms that all the accessories arrive and send to the packaging department.

Finally Packing

The packing department is responsible for assembling all the parts and doing final package

About Watch Case Size Guide

let’s understand the watch case size guide. The size of the watch case is one of the most important factors when it comes to choosing a watch. The right size watches not only fits perfectly on your wrist but also looks aesthetically pleasing. The watch case size is measured in millimeters (mm), and it is determined by the diameter of the watch case.

The diameter of the watch case is measured from one side of the watch case to the other, excluding the crown. The crown is the small button on the side of the watch used to set the time. Watch case sizes can range from as small as 20mm to as large as 50mm or more. However, the most common watch case size for men is between 38mm and 42mm, while the most common watch case size for women is between 26mm and 38mm.

Watch case size ultimately comes down to personal preference and what looks and feels best on your wrist. It’s important to consider the size of the watch case, especially if you have a small wrist or a larger wrist. A watch that is too big or too small can be uncomfortable to wear and may not look aesthetically pleasing.

One of the key factors in determining the size of a watch case is the watch movement. The watch movement is the mechanism that powers the watch and determines its functionality. There are different types of watch movements, including quartz, mechanical, and automatic. Each type of movement has different dimensions, which can affect the size of the watch case.

For example, quartz movements are typically smaller and more compact than mechanical movements. As a result, watches with quartz movements can be designed with smaller cases. On the other hand, mechanical movements are larger and require more space, which means watches with mechanical movements typically have larger cases.

Another factor that can influence the size of a watch case is the style of the watch. Some watch styles, such as dress watches, are designed to be thin and sleek, with smaller cases that fit snugly on the wrist. Other styles, such as dive watches, are designed to be more rugged and durable, with larger cases that can withstand harsh conditions.

About Watch Case Diameter

The diameter of the watch case is another important factor to consider in watch manufacturing. The diameter is typically measured in millimeters and can range from as small as 26mm to as large as 50mm or more. The diameter of the watch case can affect the overall look and feel of the watch, as well as its functionality.

For example, watches with smaller case diameters are generally considered to be more elegant and refined. They can be worn with formal attire and are suitable for occasions where understated style is preferred. Watches with larger case diameters, on the other hand, are often associated with a more sporty or casual style. They can be worn with more casual attire and are suitable for outdoor activities.

The diameter of the watch case can also affect the readability of the watch. Watches with larger case diameters typically have larger faces and numerals, which can make them easier to read. However, watches with smaller case diameters can also be designed with clear, easy-to-read dials that are suitable for everyday wear.

Do you now have a general idea of the how the watch case was made ?

Brief Summarize and Share About the Watchmaking  28

Brief Summarize and Share About the Watchmaking

I have been engaged in the watchmaking industry for almost seven years, so I’d like to share my experience with you and some of the works that are quite good.

Below is Something I learned, of the watchmaking experience:

To tell whether a watch is good or bad, you need to check the whole watch;
you can not just look at a certain aspect, but also look at some of the ungood areas, so also check the watch accessories,
If all are good, this brand watch maybe a perfect watch brand. (Brand history and movement are not yet considered)

Let’s talking details of the each important parts, the manufacturing details needed,

Watch Case Watchmaking :

Whether the case is well made or bad depends more on the appearance of the polishing treatment。

The high factory production requirements for the case are: the brush line is smooth and not sharp, which means that you need to ensure the clarity of the brushed lines and can not scratch the hand.

(the current machining equipment is more advanced than before, so the structural tolerances are well controlled (generally 3-5c)), the details should handle well, such as the polish of the surface being good, the corner area having no burr, and also handle well of the original blank case pattern of the inner side case lug area

Dial Details:

2 different places to tell if the dial is good or bad.

On the one hand, the good artwork of the dial is: ( effects generally are velvet black, matte black, semi-light, semi-matte black, enamel black), no white spots, no scratches on the good;

The other hand is the artwork of the hour marker; the hour marker is generally divided into printing marking and index;

Make sure the hour markers print in a 3D feeling, and plumpy.

When printing the luminous effect, we will take ink as a basement, so make sure the basement oil is at the right size, can’t be too big, and the print is in the middle,no offset.

For the Index plating, make sure it is good and has no pockmarks.

If it is diamond-cut hands, the diamond-cut hands should be flat with right angles,

If it is polished hands, the polished hands are plumpy, And if the hands with luminous, the luminous oil should be flat and even.

The logo and second marking line printing should be neat, can not break the line, if zoom in, you can have a slightly three-dimensional feel.

Watch Hands:

Check the three areas to see if the hands are good or bad,

1. The appearance of artwork

2. The needle tube

3. The luminous filling or coating

Normally, The appearance of artwork of hands is diamond cut, water polishing, brushing, and then plating, painting, or burn blue processing.

The plating color should be uniform; it can not be with the white dot; if you zoom it, it can not have a pockmark and a pile of oil if painting.

The baked / burned blue color should be in the right color and effect

The hands tube data should be accurate, the hour and minute hand can use the hexagonal tube, the second hand with the cross tube.

The luminous filling should be delicate and flat, and can not be concave (if there is concave, when luminous at dark, it will have a dark shadow).

To ensure the luminous brightness, the best method is to fill the oil three times, Be careful not to spill to both sides (the more times it rub, the more easily luminous overflow, it is difficult to avoid the problem of overflow burr)

Strap Making Details:

Leather straps, steel straps, and plastic straps are more common;

To tell whether the leather straps are good or bad,

On one hand, is the leather material, on the other hand, are the details of workmanship:

Make sure the ear and buckle holes are of the right size, side to cut flat, sealing edge oil to smooth,

If the strap with no sealing on the side, the edges should be regular

The loop should be tightly pressed and glued without gaps

Choose the righ size of sewing line, and the sewed line should be straight

For Steel straps, the solid strap is better than folded S/S band, and loose beads/links are better than single beads/links.

For the plastic straps, it has silicone and rubber; silicone is characterized by better softness, and it can make different colors, but easy to sticky dust

Rubber strap is stronger, and now there is a fluoroelastomer that can make with different colors, and softness is also better.

To tell the good or bad quality of the plastic strap, We mainly check the material and the artwork of abrasives; the plastic gate should be small ( gate: There are usually gate areas on plastic products. The gate is the part of the frame connection area that is formed when the liquid material is poured o)

Watch Strap Buckle:

generally divided into pin buckle, folding buckle, and turtleback buckle.

The solid buckle is better than the folded stainless buckle, It should be with the same requirement as watch cases in appearance polishment

Requirements: smooth, even, no steps and blur, no sharpness, which means you need to ensure that the brush lines are straight, even, clear and can not scratch the hand.

The Watchmaking Industry and Advanced Watch making Industry?

The watchmaking experience I am talking about today is different from some advanced watchmaking experience. The watchmaking I am talking about is just the production and manufacturing of watches in a normal mass-production factory, not the kind of watches that treats watches as works of art.
Our factory only focuses on customizing general public watches that our customers can sell in the market, while watchmaking, is different.

Watchmaking is the art and science of designing, manufacturing and repairing watches.
Watchmaking has a long history, dating back to the 16th century. Early watches were driven by hand-wound springs, but over time watchmakers developed more complex mechanisms, such as escapements that regulate the movement of gears.
Today, watchmaking is a highly specialized field that requires a combination of technical competence, creativity and attention to detail. Watchmakers must be well versed in a variety of fields, including mechanics, design and material science.

Today, watchmaking is a highly specialized field that requires a combination of technical competence, creativity and attention to detail. Watchmakers must be well versed in a variety of fields, including mechanics, design and material science.

The process of making a watch typically involves a series of steps, from designing the movement to assembling the watch and testing its accuracy. Watchmakers use a variety of tools, such as lathes, milling machines and precision measuring instruments, to create the components of a watch.

Watchmaking is also an art form, and many watchmakers create intricate designs that are both beautiful and functional. Some of the most famous watchmakers in history, such as Abraham-Louis Breguet and Patek Philippe, are known for their innovative designs and technical expertise.

Overall, watchmaking is a fascinating field that combines art, science and craftsmanship to create some of the most complex and beautiful timepieces in the world.

I guess that’s one of the reasons why watches are all sold at such high prices

I’ve shown what I know, is that the same as what you think?

Subscribe to our news, I will always share the watchmaking industry knowledge, product knowledge, etc. You will learn something from it.

גלול למעלה

בקשו הצעת מחיר מהירה

ניצור איתך קשר תוך יום עבודה אחד, אנא שימו לב למייל עם הסיומת "@ohlalawatch.com".

*אנו מכבדים את הסודיות שלך וכל המידע מוגן.